Operational Data - Mitsubishi Electric AG-150A Instruction Book

11-4 Operational data

To output operational data to USB memory in a CSV format, insert USB to USB port. Touch [Maintenance] on the setting change screen
and then touch [CSV output] tab to show the screen below.
1
CSV output screen
Item
1Charge Parameters
Operational
data
2Power consumption
data
3Output as CSV file
2
3
Touch the button to select, and touch again to deselect.
With the button selected, touch the [Output as CSV file] button to copy the charge
parameter data to the \[Serial Number]\[OperationalData]\[ChargeParameters]\[Date] folder
in the root folder of the USB memory in a CSV format.
If the folder does not already exist, one will be created.
* The date folder will be created in the format that was specified on the Unit Info screen.
* This item cannot be selected unless Charge License has been registered.
Touch the button to select, and touch again to deselect.
With the button selected, touch the [Output as CSV file] button to copy the power
consumption data to the \[Serial Number]\[OperationalData]\[ChargeParameters]\[Date]
folder in the root folder of the USB memory in a CSV format.
If the folder does not already exist, one will be created.
* The date folder will be created in the format that was specified on the Unit Info screen.
* This item cannot be selected unless Charge License has been registered.
With the Charge parameters or Power consumption data button selected, touch this button
to output the selected data to the USB memory.
* A fixed name will be automatically assigned to the file, and the file will be saved.
* Any previous data file for the same equipment in the \[Serial Number]\[OperationalData]\
[ChargeParameters]\[Date] folder will be overwritten. To save the previous data file, move
the file to a different folder before saving the new file.
* If an Expansion controller of Ver. 1.00 is connected, make sure to output the data from
both AG-150A and Expansion controller.
* If an Expansion controller of Ver. 1.10 or later is connected, the data of the Expansion
controller will also be output.
* Do not remove the USB drive while the file is being transferred.
* Save the setting while normal communication with the Expansion controller is being
established.
* Saving the charge parameter settings may take several dozens of minutes.
– 100 –
Description