Component Names And Display Screen Names - Mitsubishi Electric AG-150A Instruction Book

4. Component names and display screen names

Power indicator (AG-150A)
Not lit ... Power is turned off.
Lit ........ Power is turned on.
USB port
Screenshots of screen, their names, and the sequence they appear in are shown below.
• Screen that normally appears
Touch [
Login
Touch
[Login]
Touch
[ ]
Screen Lock
* Normally, the screen remains black. The backlight turns on when the touch panel is touched and stays on while the user is operating
the touch panel. The backlight goes off after 10 minutes of non-operation.
* When an error occurs, the backlight turns on regardless of whether the user is operating the touch panel.
Displays the operation status of the connected equipment
Not lit.......All groups are stopped.
Lit ............One or more groups of the units are ON. (not
Blinking ...Indicates that an error occurred.
Monitor/Operation
Schedule settings
Touch
]
[Cancel]
Touch [
Touch [
Touch
[Function1]
Initial
Function1
Settings
Touch
[Initial Settings]
CENTRALIZED CONTROLLER AG-150A
ON/OFF indicator lamp (LED) (system)
including the general equipments connected to
PAC-YG66DCA)
(including all connected equipments)
Main operation screen
Status List
]
]
Touch
[Function2]
Function2
Touch
[Function1]
Touch
[Initial Settings]
Touch
[Maintenance]
– 6 –
Note:
Before using the AG-150A, remove
the protective sheet on the surface
cover.
CAUTION
If the protective sheet is left on the
screen, the sheet may stick to the
LCD and cause malfunctions.
Display/Touch panel
Log
Touch 1,2,3,4
Touch Panel Cleaning
Setting change screen
Touch Touch
[User Info] [Maintenance]
User
Info
Touch
Touch
[Function2]
[User Info]
Maintenance