Test Mode Of Dvd Section - Sharp 27DV-S100 Service Manual

TEST MODE OF DVD SECTION

"NO DISC" state
Press both of the "PLAY" key and the "STOP" key on the DVD front panel of the main unit
for 5 seconds during the DVD mode to turn the unit into the DVD test mode.
(Turn the power off to cancel the test mode.)
(DVD test mode)
F0000000 00000000
Check mode of the DVD program contents
Press the "1" key on the remote control or the "STOP" key on the main unit.
Press the "3" key. (to turn the unit into the dynamic test mode.)
DYNAMIC TEST
30000000 00000000
(Turn the power off to cancel the dynamic test mode.)
Laser test mode
Press the "1" key.
To (1)
The preparation date display of the program
10000000 ~~~~~~~~
Model number display
10000001 0000D031
The version display of the program
10000002 ~~~~~~~~
Region number display
10000003 00000001
Micro-code number display
10000004 ~~~~~~~~
The preparation date display of the servo program
10000005 ~~~~~~~~
The display is returned to the initial screen
of the test mde.
LASER TEST The tray opens, the DVD laser is lit, the spindle turns momentary
and the sled moves to the outer side.
30000001 000000DD
Press the "1" key.
The DVD laser goes out, the CD laser is lit,
LASER TEST
30000001 000000CD the spindle turns momentary and the sled moves to the outer side.
Press the "1" key.
The DVD and CD lasers go out,
LASER TEST
30000001 00000000 the spindle turns momentary and the sled moves to the outer side.
Press the "1" key.
(Unplug the AC cord to cancel the laser test mode.)
(Last update)
Press the "PLAY" key.
(Model number)
Press the "PLAY" key.
(Program version)
Press the "PLAY" key.
(Region code: binary display)
Press the "PLAY" key.
Micro-code means the process
program of the system IC.
(Micro-code version)
Press the"PLAY" key.
(Servo version)
Press the"PLAY" key.
47
27DV-S100
27DV-CS10