Gear - Siemens SINAMICS S120 Configuration Manual

Motor components

5.4 Gear

Table 5- 15 Dimensions for mounting the single-disc holding brake
Shaft height
[mm]
d
100 38 118
132 42 167
160 55 167
5.4 Gear
A gearbox must be mounted, if
● the drive torque is not sufficient at low speeds
● the constant power range is not sufficient in order to utilize the cutting power over the
For questions regarding gearboxes, please directly contact the following:
Company
The following requirements must be fulfilled in order to mount a gearbox:
Table 5- 16
Prerequisites for mounting a gearbox for shaft height 100 to 160
Gearbox features
● Version as planetary gear
● Gearbox efficiency above 95 %
● Gearboxes are available for motors, shaft heights 100 to 160
● Selector gearboxes are available up to a drive output of 100 kW
● Types of construction: IM B35 (IM V15) and IM B5 (IM V1) are possible
102
D I h y
H8
80 77 15
110 100 11
110 100 7
complete speed range.
ZF Friedrichshafen AG, Antriebstechnik Maschinenbau
D-88038 Friedrichshafen, Germany
Phone: 07541/77-0
Fax: 07541/77-3470
Internet: http://www.ZF-Group.de
Prerequisites for mounting a gearbox
Drive shaft end, dimensions in [mm]
d1 d2
45 94 ± 0,1
70 118 ± 0,1
70 118 ± 0,1
Type of construction IM B5, IM B35 or IM V15
Shaft with key and full-key balancing
Configuration Manual, (APH4S), 08/2008, 6SN1197-0AD64-0BP1
d3 d4
3 x offset by 120°
M6 42
M8 60
M8 63
1PH4 Induction Motors