Mounting Position/Types Of Construction - Siemens SINAMICS S120 Configuration Manual

Information on the application of motors

7.4 Mounting position/types of construction

7.4 Mounting position/types of construction
Table 7- 1
Type of
construction
IM B35
IM V15
IM V36
Liquid must not be allowed to build up on the flange on vertically or horizontally mounted
motors. Failure to protect the flange against liquid build-up may damage the bearing and/or
the bearing grease.
126
Designation of types of construction (accdg. to IEC 60034-7)
Representation
CAUTION
Description
Standard
Special construction types
Observe the special conditions applicable to vertical axes!
Note that a special seal is required for IM V36!
Configuration Manual, (APH4S), 08/2008, 6SN1197-0AD64-0BP1
1PH4 Induction Motors