Connections For Circulating Oil Lubrication, Shaft Height 100 - Siemens SINAMICS S120 Configuration Manual

Motor components
5.4 Gear
5.4.6

Connections for circulating oil lubrication, shaft height 100

Figure 5-8
Table 5- 20
Max. pressure
0.2 bar
1.5 bar
1.5 bar
1.5 bar
Note: Circulating oil lubrication is required for certain gearboxes and V1 or V3 vertical mounting
positions:
When viewing the gearbox drive from the motor
1)
110
Connections for selector gearbox with selector unit for frame size 100
Connections for circulating oil lubrication
Wiring
Oil return
D
Main direction of
rotation
clockwise
1)
E
Main direction of
rotation
counter-clockwise
1)
Wiring
Oil inlet
M (0.5 dm /min)
3
K/L (1.0 dm /min)
3
G (1.5 dm /min)
3
Main direction of rotation
clockwise
F (1.5 dm /min)
3
Main direction of rotation
counter-clockwise
Configuration Manual, (APH4S), 08/2008, 6SN1197-0AD64-0BP1
Mounting position
V1
(closed version)
B5
V1
1PH4 Induction Motors