Advertisement
FIRST STEP - - - - - - - - - - - - - - - - - - - - -........
&CAUTION!
• Be sure to disconnect power by pulling out he
• Avoid using any cleaning agent other than
plug, and allow the maIO body to cool down
tableware detergent, such as benzine, thinner,
enough before initiating maintenance
polishing powder and scrubbing brush, for they
are harmful to the surface finish.
\
,~
I
OCID \
/
METHOD OF DETACHING THE
IXING BLADE
• The mixing blade may become hard to detach
from the shaft as It sticks.
• Immediately atter removmg the baked bread.
pour water or tepid water into the bread pan.
Leave it
for
30 minutes
10
loosen, then detach the
mixing blade.
(If you leave the mixing blade in the bread pan, It
becomes harder to detach.)
• If the mixing blade can not be detached, pour hot
water in the bread pan and leave It for more than
30 minutes to loosen and detach the mixing
blade.
MAIN BODY, LID
• Wipe with well wrung dishcloth. Do not Im
merse In water or splash water, as they may be
come the cause of malfunction or electric
shock
Do
not Ilrvnerell
In water
• You can remove the lid by opening it up to
45 degress of angle and pull It upward.
,.
00
not
Immerse Ihl bol1om In water.
Wipe
with
well wru
dl
hclolh.
• Be sure that the oven area is always kept
clean.
• Do not use the bread maker Without rubber
packing inside the Inner case.
Coupling
Sensor
Wipe very gently,
avoid knocking.
Rubber packmg
Ul
"-'--~
@ ,
• II you remove the rubber packing, It
Will
cause
nOlse_ Wash the rubber packing WIth soft mat·
erial like sponge and let It dry
• After using. unplug and gently
ipe out crum
bs or dust In the oven area with well wrung
dishcloth.
Coupling' clean soiling with a tissue paper
19
Advertisement
