Mounting The Camera - D-Link DCS-5030L User Manual

Section 2 - Installation
To mount your camera on a wall or ceiling, please follow the steps below:
It is recommended to configure the camera before mounting.
Step 1
Place the mounting bracket where you want to position the camera and use a
pencil to mark the holes.
Step 2
Use appropriate tools to drill two holes the same diameter as the plastic
anchors. After drilling the holes, insert the plastic anchors to support the
screws.
Step 3
If desired, the power and Ethernet cables can be concealed behind the
mounting bracket. Run the cables through the back of the mounting bracket,
securing them with the built-in guides. Be sure to leave enough cable length
protruding from the top to allow connection to the camera.
D-Link DCS-5030L User Manual

Mounting the Camera

1
2
3
14