Video - D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to configure the video settings for your camera. Please wait a few seconds for the camera to adjust the
video after making changes.
Video Profile: This section allows you to change the resolution, FPS, and
quality for both H.264 and MJPEG.
Resolution: Select the desired video resolution from three formats: 1280
x 720, 640 x 480, and 320 x 240. Higher settings offer better
quality, but will require more bandwidth to stream.
Bit Rate: Select the desired bit rate for the video. A higher bit rate will
increase image quality, but will require more bandwidth.
Frame Rate: Select the frame rate (FPS) to use for the video stream. Higher
settings offer better quality, but will require more bandwidth.
JPEG Quality: Select one of five levels of image quality: Very High, High,
Medium, Low, and Very Low.
Default View Select the default encoding to use when viewing your video
Mode: on the Live Video page.
Light Select the frequency used by your lighting and power to
Frequency: help reduce image flicker.
Save Settings: Click to save your settings.
D-Link DCS-5030L User Manual

Video

28 28