D-Link DCS-5030L User Manual page 36

Section 3 - Configuration
Enable the Enabling this will allow snapshots to be uploaded in different
uploading of ways:
images to an • Select Always to upload snapshots continuously based
FTP server: on the Image Frequency specified.
• Select Schedule to set a day/time when to start and stop
the uploading of snapshots.
• Select Motion/Sound Detection if you want the camera
to upload images only when motion is detected.
Image Set how frequently you want images to be taken and
Frequency: uploaded. You can choose to upload by frames per second,
or by seconds per frame.
Base File Name: Set the desired base file name for your snapshots.
File:
Select how you want uploading of snapshots to be handled:
• Overwrite will replace the old snapshot with the new
one. This means you will only have one snapshot that is
updated every time a new one is taken.
• Date/Time Suffix will add the date and time to the end
of the snapshot file name. You can also choose to make
subfolders based on a period of time you specify to help
you organize your snapshots.
• Sequence Number Suffix will add a number to the end
of the snapshot file name up to the number you specify,
after which the oldest files will be overwritten.
Test FTP Server: Click the Test button to send a test JPEG snapshot to the
FTP server specified above to make sure that your settings
are correct.
Save Settings: Click to save your settings.
D-Link DCS-5030L User Manual 36 36