Mitsubishi Electric AG-150A Instruction Book page 39

(2) To change the icons, touch the icon selection button, and select the desired icon from the ones that appear.
(3) To register a remote controller to a group, touch the remote controller selection button to bring up the remote controller selection
window, and then touch the numbers that are assigned to the units to resister. An orange frame will appear around the selected
items. Click again to deselect the selected items. Click again to deselect the selected item (no orange frame). Press the [OK] button
to save the changes, or touch the [Cancel] button to go back to the previous screen without saving any changes.
Note: A maximum of 2 remote controllers can be registered in one group.
Note: MA remote controllers do not need to be registered to a group.
* Only one remote controller can be connected to a system to which three system controllers are connected. No remote controllers
can be connected to a system to which four system controllers are connected. (The maximum connectable number is four including
system controllers.)
* The remote controllers that are registered to another group will be grayed out and not available for selection.
(4) To register a system controller to a group, touch the system controller selection button to bring up the system controller selection
window, and then touch the numbers that are assigned to the unit to resister. An orange frame will appear around the selected items.
Click again to deselect the selected items. Click again to deselect the selected item (no orange frame). Press the [OK] button to save
the changes, or touch the [Cancel] button to go back to the previous screen without saving any changes.
Note: The combined number of system controllers and remote controls cannot exceed four.
Note: K-transmission converters do not need to be registered.
(5) Press [Save setting] on the group setting window to save the settings.
– 37 –