Maintenance Screen; Copying The Data To A Usb Drive - Mitsubishi Electric AG-150A Instruction Book

7. Maintenance screen

7-1 Copying the data to a USB drive

To copy the data to a USB drive, plug the USB into a USB port, and touch [Data Utility] in the screen that appears when [Maintenance] on
the setting change screen is touched.
Initial settings
button
Charge parameter
button
Item
Setting data Initial settings
Operating
Charge parameter
data
Copy to USB memory
Touch the button to select, and touch again to deselect.
With the button selected, touch the [Copy to USB Memory] button to copy all settings data
(except the AG-150A user information), to the ¥[Serial Number]¥[SettingData]¥ folder in the
root folder of the USB memory. If the folder does not already exist, one will be created.
* The type of settings that cannot be set on the LCD screen, such as the energy-save
setting data, will also be copied.
Touch the button to select, and touch again to deselect.
With the button selected, touch the [Copy to USB Memory] button to copy the charge
parameter data to the ¥[Serial Number]¥[SettingData]¥ folder in the root folder of the USB
memory in the CSV format. If the folder does not already exist, one will be created.
With the Setting Data, User Info, or Charge Parameter button selected, touch this button to
copy the selected settings to the USB memory.
– 46 –
USB port
Description
Copy to USB
memory button