Specifications - Hitachi CS 33EDT Service Manual

1. Specifications

Model
Item
Engine type
Cylinder quantity
- inner diameter x stroke
Engine displacement
Momentary no-load
revolutions
Service revolutions
Idling revolutions
Rotation direction
Service fuel
Fuel tank capacity
Carburetor
Spark plug
Startup method
Air cleaning method
Stopping method
Muffler type
Power transmission
method
Guide bar length
Saw chain used
Saw chain
Sprocket
Chain oil feeding method
Chain oil tank capacity
Chain oil discharge rate
Chain oil used
Handle
Anti-vibration mechanism
Dry weight
Overall dimensions
(L x W x H)
Sound pressure level LpA 100 dB(A)
Vibration level
(Front/Rear)
Exhaust gas emissions
(Stage 2)
Standard accessories
SPECIFICATIONS
CS 33EDT
Air-cooled, two-cycle gasoline engine
1-37 x 30 mm
32.2 mL
-1
11,500 to 13,000 min
-1
8,000 to 10,000 min
-1
2,800 to 3,200 min
Clockwise
Mixed gasoline
Gasoline: dedicated two-cycle oil = (25 to 50): 1
290 mL (run continuously for 19 to 24 minutes)
Diaphragm type (with primer pump)
NGK BPMR7A
Recoil starter method
Dry
Ground
Silencer
Automatic centrifugal clutch
350 mm (14 inch), SN, 300 mm (12 inch), SN
91VG-52, 91VG-45
Pitch: 9.53 mm (3/8"), Gauge: 1.27 mm (0.05")
Star, six teeth
Automatic feed
180 mL
-1
8 mL/min. (9,000 min )
Dedicated chain oil
Equipped with anti-vibration device
Engine floating type
3.4 kg
277 x 255 x 220 mm
2
4.4 / 6.1 m/s
Noncompliant
• Combi box wrench 13 x 19 ---------------------- 1
• Chain case ------------------------------------------- 1
• Spike set ---------------------------------------------- 1
Europe, Australia, China and Russia only.
Mounted on the body for Europe and Australia.
• Guide bar --------------------------------------------- 1
• Saw chain -------------------------------------------- 1
-2-
CS 33EDTP
Compliant
Remarks
Revolutions at actual work
When viewed from end of
the output shaft
From Walbro
SN: Sprocket nose
From Oregon
Without adjusting amount
of oil
Excluding saw chain and
guide bar