Advertisement
Mounting MP2
Attaching Docking Station to Fixed Tilt Mount
1. Fasten docking station to MP2 Fixed Tilt Mount with two (2) M4 x 14 mm PHMS as shown below. Mount monitor on
docking station according to manufacturer's instructions.
Mounting the Power Supply
1. Fasten Clamping Block to power supply with two (2) M4 x 12 mm PHMS as shown below.
2. Fasten power supply to Post with rear Clamping Block and two (2)
#10-32 x 9/16'' PHMS as shown below.
Clamping Block
M4 x 14 mm PHMS (2)
M4 x 12 mm PHMS (2)
Clamping Block
#10-32 x 9/16'' PHMS (2)
DU-PH-0062-60 Rev A 7/16/07 GCX Corp Page 6 of 7
Advertisement
