Table of Contents
Advertisement
2. Names and Operations (Continued)
Display Section
(Refer to the page 4)
Displays when an operation mode is entered
by the remote control unit, while another
operation mode has been already selected. This
indicates that the operation mode cannot be
changed.
18.
Disabled Feature indication
Displayed if the selected feature was disabled
during installation.
19.
GHP operation standby indication
Appears during standby if a gas heat pump air
conditioner is used.
20.
Heating standby mode indication
appears when the fan of the indoor unit is
stopped or in low fan speed.
21.
/
/
/
indication
The selected fan mode is displayed.
22.
SWING indication
Appears while the flap swings.
23.
Flap position indication
Indicates the flap position.
24.
Filter indication
Appears when filter needs cleaning. Clean the
filter.
25.
Inspection indication
Appears when the protective device is activated
or when an abnormality occurs.
26.
Ventilation indication
Appears when a fan available in the market is
installed and is operating.
Fan mode select
EG-4
27.
Oil indication
Appears when the engine oil needs to be
changed. (Appears when the gas heat pump
air conditioner is used.)
28.
Sleeping
Appears during the sleeping function.
29.
CAUTION
Appears when the protective device is activated
or when an abnormality occurs.
30. Unit No. indication
Indicates the unit No. of the selected indoor
unit.
31.
TEST indication
Appears while in test operation.
Hide quick links:
Advertisement
Table of Contents
