Setting The Present Time - Sanyo RCS-TM80BG Instruction Manual

3. Setting the Present Time

1. Press and hold for more than 2 seconds to enter in
the present day and time setting mode.
Once you enter in the setting mode,
"time" flash.
2. Set " " to today's day of the week.
1
Press *
display) in the order of : Su → Mo → Tu → .... Press
to move it in the order of : Su → St → Fr → ....
2
* While in time setting mode, the temperature setting
buttons function as
3. Press to change the present "hour" in the range of 0 to 23*
Set the present hour and press
The "hour" digits light up, and the "minute" digits start flashing.
2
* If the clock uses the 12 hours AM/PM setting, the hour is displayed in the range of AM 0 to 11/PM 0
to 11.
4. Press , to change the present "minute" in the range of 0 to 59.
Set the present minute and press
setting mode.
Note
* The unit returns to the normal mode if the
during the setting. In this case, all the settings in progress will be lost.
* If the present time is invalid, "- - : - -" is displayed.
If the power failure for more than 1 hour occurs, check if the set data of day and time are valid.
, " "(day) and
to move " " (flashing on the
(changing day) button.
.
. The day and time are set and finishes the
is pressed or there is no operation made in 3 minutes
EG-5
3,4 1,3,4
2
.
2
EG