Dss Console; Installing A Dss Console; Programming Dss Consoles - NEC DS2000 Hardware Manual

Hide thumbs Also See for DS2000:

Table of Contents

DSS Console

The DSS Console gives a keyset user one-button access to extensions, trunks and system features. Keep the

following in mind when installing DSS Consoles:

You can only connect 4 DSS Consoles.

You can only connect DSS Consoles to Super Display or 34-Button Display telephones.

A DSS Console does not require a separate station port – it connects directly to the keyset.

To install a DSS Console (Figure 4-5) (Figure 4-6):

Turn the telephone upside down and remove the plastic ﬁller plug from the DSS modular connector.

Plug the DSS Console's 8-pin modular line cord into the telephone's DSS connector.

Plug the other end of the 8-pin line cord into the DSS Console's 8-pin jack.

If you have a 24-Button DSS Console, attach the metal plate to both the DSS Console and telephone.

See Figure 4-5 Installing a 24-Button DSS Console below for more.

1801 - DSS Type

For the extension to which you have connected the DSS Console, enter 1 for 24-button, 2 for 110-but-

ton and 0 for unassigned.

1801 - DSS Block Number

For the extension to which you have connected the DSS Console, enter the number of the block that

corresponds to the connected console. A block is a unique DSS Console assignment. The system pro-

vides up to 4 blocks; one for each console.

will still have unique Personal Speed Dial numbers, since a DSS Console uses the Personal Speed

Dial for the extension to which it is attached.

1704 - DSS Console Key Assignment

Program the DSS Console's keys. Refer to the Software Manual on the System Document CD that came

with your system for additional programming details.

DS2000 Hardware Manual

Your consoles can share the same block if you want them to have the same programming. They

DSS Console

Figure 4-5: Installing a 24-Button DSS Console

To 625 Modular Jack

Keyset

Section 4: Optional Equipment N 4-5

DSS Console

Table of Contents