Sound - Mitsubishi Electric 738 Series Owner's Manual

Sound

Sound Audio
Settings in this menu are saved for the current input only with the exception of Balance and Subwoofer, which
apply to all inputs.
To make Audio adjustments while watching TV and without using the menu:
1. Press the AUDIO key.
2. Press to select an audio option.
3. Press to change the setting.
TV Speakers On
Off
Center
(838 Series)
Bass Controls volume of low-pitched sound from the TV speakers.
Treble
Controls volume of high-pitched sound from the TV speakers.
Balance
Controls audio balance between the right and left TV speakers
Subwoofer
[Subwoofer level
(838 Series)
adjustment]
Sound Mode Stereo
Surround
Music
(838 Series)
Night
(838 Series)
Level Sound On, Off
Listen To Stereo
(applies only
to analog
Mono
channels from
the ANT input)
SAP
(Second Audio
Program)
Downloaded From TV-Manual.com Manuals
Turns on the internal TV speakers.
Turns off the internal TV speakers so you hear sound only from a connected A/V
receiver.
Note: When you disconnect an A/V receiver, be sure to change the TV Speakers
setting to On to hear sound from the TV speakers.
Makes the TV's speaker array act as a center channel. See
as a Center Channel," page
Notes:
• Set Sound > Global > Center Channel to On to make this setting available.
• To de-activate the center channel, change this setting to
Adjusts the volume level of a connected subwoofer.
Note: Set Sound > Global > Subwoofer to On to make this adjustment avail-
able.
No special audio effects from the TV speakers
Modifies audio from the TV speakers.
• For monaural (non-stereo) programs, creates a simulated stereo effect.
• For stereo programs, creates a simulated surround sound effect.
• 838 Series. The TV's speaker array plays 5.1 surround sound if available.
Optimizes the TV's speaker array for music listening.
Focuses the TV's speaker array to a single point to limit sound heard by others
outside the room. Press ENTER to adjust the focal point (Night Angle).
Reduces differences in sound volume between programming segments, such as
the difference between regular broadcast programs and commercial segments.
The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The
word Stereo is displayed when you tune to a channel broadcasting in stereo.
Reduces background noise. Use when receiving a weak stereo audio signal. All
audio is played as mono.
Selects an additional monaural sound track not audible during normal TV viewing.
The SAP signal might be related to the program (such as a sound track in a foreign
language), or it might be unrelated (such as a weather report). If an SAP signal is
broadcast, the letters SAP are displayed when you tune to the channel.
4. TV Menus
27.
For assistance call 1(800) 332-2119
51
"Using the TV Speakers
On or Off.