Panasonic F-GMG01H Operating Instructions Manual page 2

Nanoe generator
Table of Contents

Advertisement

Beautify the human and the air.
The
About
The
, generated from the most advanced nano-
technology, is a kind of a nano-sized ion particle coated with
water particles.
,which is generated by applying high voltage in order
to split water, has a life about 6 times longer than the air ion,
and its water content (volume proportion) is above 1,000 times more than the latter.
With
technology, the effect of sterilization
inhibiting mold bacteria
Furthermore, it creates an atmosphere that is conducive for beautiful, hydrated skin.
The result is of a 240-minute test in closed space of 10m
application space.
The deodorizer effect differs according to the surrounding environment
(temperature / humidity), operation time, type of odor / fiber.
・Please note that products incorporating nanoe™ technology are not to be used for medical treatment.
・The technology has been found to be effective in suppressing a number and variety of harmful airborne and
adhering substances, including viruses bacteria , mould fungi. However, nanoe™ does not create an aseptic
environment, nor does it guarantee prevention of infection.
・Data supplied regarding the effectiveness of nanoe™ have been obtained through experiments under special
conditions using devices which generate electrostatic atomized water, and have not been tested through
commercial products with the devices incorporated in them.
・The actual effects may vary depending upon the specific condition of the room, etc.
※1
<airborne bacteria>
Testing organization : Kitasato Research Center of Environmental Sciences
Test method : Directly expose and measure the bacteria count collected in testing space of 10m 3 .
Inhibiting method : release nanoe
Target : airborne bacteria
Test outcome : inhibited 99% and above in 240 minutes / [Test number 21_0142]
<adhered bacteria>
Testing organization : Kitasato Research Center of Environmental Sciences
Test method : measure the bacteria count soaked in the fabric inside the 1 m
Inhibiting method : release nanoe
Target : bacteria clinging onto the standard fabric.
Test outcome : inhibited 99% and above in 24 hours / [Test number 20_0154_2]
※2
Testing organization : Panasonic Corporation Analysis Center
Test method : directly expose in 45L test container and measure with ELISA method.
Inhibiting method : release nanoe
Target : pollen (Japanese cedar)
Test outcome : inhibit 99% and above in 120 minutes / [E02-080303IN-03]
※3
Test trustee : Japan Food Research Laboratories.
Test method : measure change in bacteria count in test room measuring 6 tatami mats.
Inhibiting method : release nanoe
Target : airborne mold bacteria
Test outcome : inhibit 99% and above in 60 minutes [No. 205061541-001]
※4
Testing organization : Panasonic Corporation Analysis Center
Testing method : conduct verification by using 6-phase odor intensity notation in test container of 250L.
Deodorizing method : release nanoe
Target : adhered cigarette odor
Test outcome : odor intensity drops to 1.9 within 30 minutes [E02-090313MH-01]
When odor intensity drops by 1, it means reduction of 90% (Level 1 of odor intensity is such a level that one
can perceive very weak smell)
and the
Note :
2
technology of Panasonic.
and deodorization
TM
TM
TM
TM
TM
mark are trademarks of Panasonic Corporation.
, inhibiting allergic substance
can be achieved.
3
, instead of in actual
3
test container.
,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents