Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beko WMB 60831 DS
Summary of Contents for Beko WMB 60831 DS
-
Page 1: Washing Machine
Washing Machine WMB 60831 DS WMB 60831 D WMB 61031 DS WMB 61031 D... - Page 2 Please read this manual first! Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1 Your Washing Machine Program selection and consumption table ......17 Overview ......4 Auxiliary functions . -
Page 4: Your Washing Machine
Overview 1 - Detergent Drawer 4 - Control Panel 2 - Door 5 - Filter Cap 3 - Top Lid 6 - Height-adjustable feet... -
Page 5: Specifications
Specifications Models Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net Weight (±4 kg) 220-240 V / 50Hz Electricity (V/Hz.) Total Current (A) 2000-2350 Total Power (W) 1000 1000 Spinning cycle (rpm max.) Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards. -
Page 6: Warnings
Warnings Please read the following information. before washing clothes. First run the Otherwise, there may be the risk of “Cottons 90°C” program without personal injury or material damage. clothes and with detergent. Moreover, any warranty and reliability • Ensure that the cold and hot water commitment will become void. connections are made correctly when installing your machine. Otherwise, General Safety your laundry may come out hot at the • Never place your machine on a carpet end of the washing process and may covered floor. Otherwise, lack of... -
Page 7: Safety Instructions
the product. • Close the loading door when you leave the area where the machine is Safety instructions located. • This appliance must be connected to • Store all detergents in a safe place out an earthed outlet protected by a fuse of reach of the children. of suitable capacity. Things to be done for energy • The supply and draining hoses must always be securely fastened and saving remain in an undamaged state. -
Page 8: Installation
Installation Removing packaging washing machine needs to be moved again in the future. reinforcement C Never move the appliance without the Tilt the machine to remove the packaging transportation safety bolts properly reinforcement. Remove the packaging fixed in place! reinforcement by pulling the ribbon. Appropriate installation location Install the appliance in environments which have no risk of freezing, in a stable and... -
Page 9: Connecting To The Drain
• Connect the special hoses supplied not be connected to the hot water with the machine to the water intake tap. Laundry may be damaged or the valves on the machine. The hose appliance may switch to protection bearing the “red” sign (90°C max) mode and not work. is the hot water inlet and the hose bearing the “blue” sign (25°C max) is When returning the appliance to its place for the cold water inlet. -
Page 10: Electrical Connection
discharge, the end of the hose must domestic waste. not be submerged in the drain water. Packaging materials of your machine are The end of the hose must be able manufactured from recyclable materials. to take in air. The hose should be pushed into the drainage for more Disposing of the old machine than 15 cm. -
Page 11: Initial Preparations For Washing
Initial preparations for washing Sorting the laundry • Empty pockets and remove all foreign objects such as coins, pens and • Sort the laundry according to type of paper clips. If possible, turn pockets fabric, colour, and degree of soiling out and brush. and permissible water temperature. • Place small items like infants’ socks Always follow the advice on the and nylon stockings, etc. -
Page 12: Loading Door
Detergent, softener and other Following weights are given as examples. cleaning agents Laundry type Weight (gr.) Add detergent and softener before starting Bathrobe 1200 the washing Programme. Napkin Never open the detergent dispenser drawer while the washing Programme is Duvet cover running! Bed Sheet When using a Programme without pre- Pillowcase wash, no detergent should be put into the Tablecloth pre-wash compartment (Compartment Towel... - Page 13 Detergent quantity for prewashing 1/2 measure for main washing 1 measure an additional 1/2 with hard water measure Softener Put the softener into the softener compartment of the detergent dispenser. • Use the proportions recommended on the packet. • Never exceed the (> max <) level marking; otherwise, the softener will be wasted without being used. • If the softener has lost its fluidity, dilute dense softener with water before placing it in the detergent drawer.
-
Page 14: Selecting A Program And Operating Your Machine
Selecting a Program and Operating Your Machine Control Panel Figure 2 1 - Program selection knob (Uppermost position On/Off) 2 - Display 3 - Time delaying button 4 - Program follow-up indicator 5 - Start/Pause button 6 - Auxiliary function keys 7 - Spin speed adjustment button 8 - Temperature adjustment button Dark wash Dark wash Synthetics Cottons Pre-wash Main Rinse Wash... -
Page 15: Turning The Machine On
Turning the machine on • Cottons You can wash your durable clothes with Plug in your machine. Turn the tap on this program. Your laundry will be washed completely. Check if the hoses are with vigorous washing movements during connected tightly. Place the laundry in a longer washing cycle. It is recommended the machine. Add detergent and softener. for your cotton items (such as bed sheets, "Turn the program selection knob to the duvet and pillowcase sets, bathrobes, program position you wish to run."... -
Page 16: Special Programs
• Hand wash program is displayed on the spin speed You can wash your woolen/delicate indicator. clothes that bear “not machine- To decrease the spin speed, press the washable” labels for which hand wash is “Spin” button. Spin speed decreases recommended on this program. It washes gradually. -
Page 17: Program Selection And Consumption Table
Program selection and consumption table Selectable Programme temperature range °C Cottons 70 2.48 1600 • • • • • • Cold-90 Cottons 70 1.5 1600 • • • • • • Cold-90 Cottons 70 0.96 1600 • • • • • • Cold-90 Cotton Economic 60** 49 1.02 1600 •... -
Page 18: Auxiliary Functions
Auxiliary functions selected program. • Rinse Plus Auxiliary Function Selection Buttons This function enables your machine to Select the required auxiliary functions make another rinsing in addition to the before starting the program. Furthermore, one already made after the main wash. you may also select or cancel auxiliary Thus, the risk for sensitive skins (babies, functions that are suitable to the running... -
Page 19: Time Display
Time display program. Thus, the time delay will be cancelled. The “ ” (End/Cancel) The display shows the time remaining for light flashes continuously. Then, select the program to complete while a program the program you wish to run again. is running. -
Page 20: Changing The Selections After The Program Has Started
Changing the selections after Child-proof lock the program has started Protect the appliance from being Switching the machine to standby tampered by children by means of the mode child-proof lock. In this case, no change Press the “Start/Pause” button to switch can be made in the running program. the machine to pause mode while a C If the program selection knob is turned program is running. -
Page 21: Ending The Program Through Canceling
no program is running. Child-proof lock will not be deactivated in case of power failures or when the machine is unplugged. To deactivate the child- proof lock, press the 1st and 2nd auxiliary function buttons for 3 sec. Ending the program through canceling When another program is selected instead of a running program by turning... -
Page 22: Quick Instructions For Daily Use
Quick instructions for daily use Preparation loading door or if the temperature in 1. Turn the tap on completely. Check if the machine is low. the hoses are connected tightly. In order to add laundry after the start- 2. Place the laundry in the machine. up of the Programme: 3. - Page 23 “Stand-By” mode. "Door" and “End/ Cancel” indicator lights continue to light up solidly and level of illumination decreases. Other lights and indicators will turn off. 2. Turn the Programme selection knob to on/off position. 3. Turn the water tap off. 4. Check to see if there are any kinks and foreign substances on the seal of the loading door.
-
Page 24: Cleaning And Care
Cleaning and care Detergent drawer Clean the drum with a stainless steel cleaning agent. Never use steel wool Remove any powder residue buildup in or wire wool. the drawer. To do this; 1. Press the dotted point on the siphon Outer cabinet and control panel in the softener compartment and pull towards you until the compartment is When necessary: removed from the machine. -
Page 25: Draining Any Remaining Water And Cleaning The Pump Filter
under streaming water. • Replace the gaskets and filters carefully and tighten the hose nuts by hand. Draining any remaining water and cleaning the pump filter Filter system in your machine prevents solid items such as buttons, coins and If it is composed of one piece, hold it from fabric fibers clogging the pump propeller both sides and open it by pulling out. - Page 26 • Place a large container at the end of Close the one-piece filter cap of your the hose. Drain the water off into the product by fitting the tabs on the bottom container by pulling out the plug at into their positions and pushing the upper the end of the hose. If the amount of part of it.
-
Page 27: Solution Suggestions For Problems
Solution suggestions for problems Cause Explanation / Suggestion Programme cannot be started or selected. Machine may have switched to self Bring your machine to factory settings by turning protection mode due to an infrastructure the Programme selection knob. (see, Ending the problem (such as line voltage, water Programme through Cancelling) pressure, etc.). Water in the machine. There may be some water in your machine when you receive it. - Page 28 The door is jammed. - Water level might be above the lower level of the door. - Machine might be heating up the water - Run either the “Pump” or “Spin” Programme. or it may be at the spinning cycle. - Wait until the process is over. - Due to an electrical mechanism, the door - Wait until the process is over.
- Page 29 It continuously washes. Remaining time does not count down. - The machine will wait until there is sufficient amount of water to avoid poor washing results due In the case of a paused countdown while to lack of water. Then the timer will start to count taking in water: down.
- Page 30 - Washing performance is poor: Oily stains appear on laundry. - Washing performance is poor: Bad odour - Such odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/or in short Programmes. - Oily accumulations on the drum may - Leave the detergent dispenser drawer as well have stuck to the laundry. as the loading door of the machine ajar after each - Oily accumulations on the drum may washing.
- Page 31 Clothes do not smell like the softener. - If the water hardness is higher, using insufficient amount of detergent can cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness. - Insufficient amount of detergent used. - If detergent is put in the prewash compartment - The detergent was placed into the wrong although prewash cycle is not selected, machine...