Ge-50576-A Components - Bosch GE-50576-A Operating Manual

2.0 COMPONENTS
No. Name
1 Microphone
2 MIC Connector
3 Tool Body
4 DC Adaptor Jack
5 Power LED
6 Charge LED
7 USB Connector
8 Update Button
9 Touch LCD
10 Start Button
11 Power Button
Description
Flexible shaft directional microphone
Nut type microphone connector
Tool Body
AD/DC converter adaptor jack
DC 12V, 2A output is recommended when USB
charging is not available
LED displays power status
Displays charge status. Note: If the unit is powered
on while being charged (via DC adapter or USB
cable) the charge LED turns green.
USB connection port for charging
& firmware update
Depress the update button through the hole in the
case when software updates are required.
Resistive touch panel LCD display
Mechanical start button Operation is the same as
on the main display
Mechanical Power on/off (Sliding type)
• Power On : Slide left to turn on
• Power Off : Slide right to turn off
• Auto Sleep mode: Automatic LCD power-off
after 5 minutes without operation. Wakes up when
the screen is touched.
– 3 –
Remark
• Power On: Blinks Green for
4 seconds, then turns solid Green
• Normal Status: Solid Green
• Red Blink: Sleep mode – up to
5 minutes
• Green/Red Blink: Timed out –
Power must be turned Off, then
back On
• Power on: Blinks Green for
4 seconds, then turns solid Green
• Normal status: Solid Green
• Red Blink: Sleep mode (up to
5 minutes)
• Green/Red Blink: Timed out –
Power must be turned Off, then
back On
• Red: Charging
• Blinking Red: Low Battery
• Green: Charge complete
3.4", 480RGB, 272 dots
Sleep mode is not the same as
Power Off. The processor is
active, but the display is off.