Table of Contents
Advertisement
4.0 OPERATION
1. Remove the microphone from the storage
case and carefully connect it to the
GE-50576-A.
2. Slide the power button to turn on the unit.
The Power LED will blink, then turn solid
green.
3. In normal operation, the Booting Screen is
displayed immediately after powering on.
Please minimize background noise as much
as possible during testing.
4. The Main Screen is displayed. Place the
microphone close to the belt (approx. 1cm)
without bending the microphone shaft
excessively.
To ensure proper readings, some values
may need to be adjusted to reduce the
impact of background noise. Refer to
Section 7, Noise Cancelation for
more information.
5. Touch Start button on the screen or push
Start button on the tester body. The
button image will change to a red square,
and a tone will sound.
– 5 –
Hide quick links:
Advertisement
Table of Contents
