Advertisement
to select CODE OPERATOR.
Press <OK> and enter the operator code. (2 digits)
Press <OK> to confirm.
Page 24
When the alarm sounds, you can turn off even when the keypad is
blocked.
The alarm volume is the same set for the ringer
handset. If the handset ringer is programmed as
turned off, the alarm will sound with the volume level 1.
If it's time to sound the alarm when the phone is being used in
one internal or external call, the icon and the message ALARM ON
will flash on the display and you will hear an alert tone, indicating that the
alarm was triggered. To disable the warning tone, press any
key or press and hold to turn off the alarm. If the time comes
sounding the alarm when the phone is receiving ringtone
(Incoming call) or locating the phone (page button), the alarm will not
will sound, however, if the SNOOZE function is enabled, the alarm will sound
again after seven minutes.
You can use your phone as an alarm clock. When the alarm is
programmed, the display will show the icon. When it comes time
predetermined display will appear in the icon. ALARM ON and flashing
selected ringtone for the alarm will sound for 45 seconds. To disconnect
the alarm, you can press any key on the handset. If the function
SNOOZE is activated, the alarm will sound again after seven minutes.
To turn SNOOZE, you must press and hold the
key.
24
Con
figuration handset
Con guration alarm (clock)
Turning the alarm
Press
and
to select CONF monophosphate.
Press <OK> and
to select ALARM.
Press <OK> and
to select ON or OFF.
.
Press <OK> to con rm.
Setting the alarm time
Press
and
to select CONF monophosphate.
Press <OK> and
Advertisement
