Advertisement
Using the arrows
select the basis on which the handset will be registered.
Press <OK> and will be asked to enter the PIN.
Enter the PIN (factory set 0000).
Press <OK> to confirm.
Wait a few seconds until the record is made.
Key
NOTE: If you have one base BASE select 1 if register in another
select base BASE 2 (the extension can be registered on up to four bases
different).
If registration was successful, you will hear a confirmation tone and
antenna icon stops flashing. The registered handset will be assigned
automatically the next available number. This number is displayed
on the display when the handset is idle. If there was no success in
register the handset, the antenna icon will blink in this case repeat
registration procedure.
Page 30
30
Con
phi
figuration handset
Selecting the base
Press
and
to select CONF monophosphate.
Press <OK> and
to select SELECT BASE.
Press <OK> and
to select the desired base.
Press <OK> to confirm.
Internal call, call transfer and conference
Making an intercom call
With the handset in idle status, press
the number
of registered handsets will appear on the display.
Enter the handset number you want to make an internal call
At the called handset press
to answer the internal call.
Note
the second handset will be called immediately.
Calling all of the handsets
handsets registered will appear on the display.
Press the <9> to call all the handsets registered to the base.
The
The
Advertisement
