90
ACS800-04
Input
size
current
A
2
A
s value for -7 units at 660 V
1)
minimum short-circuit current of the installation
Note 1: See also
fuses, see
NEMA data
Note 2: In multicable installations, install only one fuse per phase (not one fuse per conductor).
Note 3: Larger fuses than the recommended ones must not be used.
Note 4: Fuses from other manufacturers can be used if they meet the ratings and the melting curve of the fuse does not
exceed the melting curve of the fuse mentioned in the table.
Technical data
Ultrarapid (aR) fuses
Min. short-
circuit
1)
current
A
A
Planning the electrical
installation:
on page 94.
Fuse
2
A
s
V
Manufacturer
Thermal overload and short-circuit
Type DIN 43620
Size
protection. For UL recognized
PDM code: 00096931-G, 00556489 A