5. Trouble shooting
5. Trouble shooting
5.1 Trouble shooting test setup
Power on all of test equipment
- Connect PIF-UNION JIG or dummy battery to the DUT for power up.
- Connect mobile switch cable between Communication test set and DUT when you need to make a
phone call.
- Follow trouble shooting procedure
5.2 Power on Trouble
Check Points
-Battery Voltage( Need to over 3.35V)
-Power-On Key detection (PWRON signal)
-Outputs of LDOs from PMIC
Figure 51 Equipment setup
- 76 -
4.000V 0.0000A