Forwarding Calls Automatically; Using Variable Call Forwarding; Storing A Destination/Activating Call Forwarding - Siemens optiPoint 500 entry Operating Instructions Manual

Step by Step
Line
Store
Call forwarding
C
or and
or
Store

Forwarding calls automatically

A call is diver ted to the fixed call forward ing destination
even if you have not activated fixed call forwarding (and
provided that your system is configured for this facility).
If "forwarding ring no answer" (transfer of ringing) has
been programmed, calls are rerouted automatically if,
for example, they are not answered after several rings
or they arrive when you are already engaged in a call.

Using variable call forwarding

Each time you activate variable call forwarding, you
specify the destination number to which calls are to be
diverted. You will find variable call forwarding particular-
ly useful if you have to divert calls to frequently chang-
ing destinations.
Storing a destination/
activating call forwarding
If configured: p ress the key.
Press the key. The lamp lights up.
Press the key.
If the "store" and "call forwarding" keys are not config-
ured on your telephone:
F::
Lift the handset and enter the UK code
F==
or Standard code
E
Enter the number of the destination.
Press the key. The lamp goes out.
I
If you have already lifted the hand set and entered the
special code:
Replace the hand set.
Call forward ing is thus activated.
If you enter a number belonging to a networked
HiPath 40 00 system, you must conclude
input with
G
.
Forwarding calls
29 29 29 29