Deactivating Call Forwarding; Forwarding Calls For A Different Terminal; Storing A Destination For Another Telephone/Activating Call Forwarding - Siemens optiPoint 500 entry Operating Instructions Manual

Forwarding calls
Step by Step
Call forwarding
C
or and
or
F:= F=::
or
or
Ente r th e code !
30 30 30 30

Deactivating call forwarding

Press the key. The lamp goes out.
If your telephone d oes not have a "call forward ing" key:
G::
Lift the handset and enter the UK code
G==
or St andard cod e
I
Replace the handset.
Forwarding calls for a different
terminal
You can store, activate, check and deactivate call for-
warding for another telephone, fax machine or PC from
your own telephone. To do so, you need to know the
PIN for this terminal or you must have the "Call forward-
ing for remote terminal" class of service.
Precondition: The "store" key is configured on your
telephone.
Storing a destination for another
telephone/activating call forwarding
UK code or Stand ard code/Euro code.
Enter the code which has b een programmed for you.
EG
Enter the number of the other telephone and confirm
your input with the square key.
EG
Enter the PIN of the other telephone and confirm your
inp ut with the square key.
G
or Press the square key only
(if your own station has the "Call forwarding for remote
terminal" class of service).
EG
Enter the number of the destination and confirm your
inp ut with the square key.
G
or Press the square key only
(the telephone on which you are storing call forwarding
thus b ecomes the call forwarding d estination).
Wait for the acknowledgment tone.