Deactivating Call Forwarding For Fax, Pc Or "Busy; Changing Call Forwarding For Another Terminal - Siemens optiPoint 500 entry Operating Instructions Manual

Forwarding calls
Step by Step
Store
Store
Store
32 32 32 32
G
or Press the square key only
(if your own station has the "Call forwarding for remote
terminal" class of service).
EG
Enter the number of the destination and confirm your
inp ut with the square key.
G
or Press the square key only
(the telephone on which you are storing call forwarding
thus b ecomes the call forwarding d estination).
Wait for the acknowledgment tone.
Press the key. The lamp goes out.
Deactivating call forwarding for fax, PC or
"busy"
Press the key. The lamp lights up .
E
Enter the code for deactivating the particular type of call
forwarding. The codes are defined by System Support.
You can enter your call forwarding deactivation codes in
the following table:
"Deactivate call forwarding for fax":
"Deactivate call forwarding for PC":
"Deactivate call forwarding for busy":
EG
Enter the number of the other terminal and confirm
your input with the square key.
EG
Enter the PIN of the other terminal and confirm your in-
p ut with the square key.
G
or Press the square key only
(if your own station has the "Call forwarding for remote
terminal" class of service).
Wait for the acknowledgment tone.
Press the key. The lamp goes out.
Changing call forwarding for another
terminal
The procedure is exactly the same as for Store/
Activate:
for another telephone Æ page 30,
for fax, PC or busy Æ page 31.
#43
#42
#49