Standby Mode; Flexcontrol Footswitch; Pick-Off Bands; After Ironing - Miele PM 1210 Operating Instructions Manual

Standby mode

Standby mode is turned off at the factory. It
can be reactivated by Miele Service. The
time interval after which the ironer switches
into Standby mode can be set between 1
minute and 30 minutes of inactivity. The
ironer can be turned on again by pressing
the "On / Off"  button.
In Standby mode the heater plate is disen‐
gaged and the roller comes to a standstill.
The heating is turned off.

FlexControl footswitch

Steaming the laundry
While ironing, press the FlexControl foot‐

switch with your foot to switch the ironer
to steaming mode and steam the laundry.
When the ironer is switched to steaming
mode, the roller stops. The heater plate re‐
mains in contact.
Continue ironing
Remove your foot from the footswitch

again to continue with the ironing proce‐
dure.
When the foot switch is released, the roller
automatically starts to rotate again and the
ironing procedure is continued.
Alternatively, the footswitch can be adjus‐
ted by Miele Service in such a way that the
heater plate disengages and the roller
stops when the footswitch is activated.

Pick-off bands

The pick-off bands are used for picking
laundry off the roller.
The ironed laundry can be very hot when
it comes out of the heater plate.
Danger of burns!
Use protective gloves if necessary.
en-CA - Operation

After ironing

Let the roller run for about 5 minutes at

minimum heating temperature to dry out
the roller cover completely.
Turn off the rotary ironer using the "On /

Off" button .
The heater plate will disengage and the fan
will run for 10 minutes to cool down. The
"On / Off"  button will flash during this
time.
Switch off the on-site main switch.

 Allow the ironed laundry to cool down
before packing or stacking it.
Hot laundry could self-ignite and cause a
fire.
Ironing with a coin-operated pay‐
ment system
Switch the ironer on by pressing the "On /

Off"  button.
The  display symbol flashes.
Insert the coin or token.

The  symbol will go out in the display.
Select the corresponding temperature

range according to the type of laundry.
Select the desired roller speed.

After the  indicator light goes out, the
rotary ironer is ready for ironing and the
countdown of the purchased ironing time
begins.
Press the  button to start the ironer.

At the end of the ironing time, the heater

plate disengages and the roller comes to a
standstill. The  display symbol flashes.
More ironing time can be purchased at
any time.
15