1MRS756740
3.7.
3.8.
COM600 series, Version 4.1
HMI Configuration Manual
Measurement page configuration
The Measurement Page Configuration Tool can be started from the bay, voltage level,
or substation object in the Substation structure. The tool has two tabs: Measurement
Page and Options. The configurable properties for the measurements are shown in
Table 3.7-1.
In the Measurement Page Configuration Tool you can:
•
browse all measurements objects.
•
select / deselect measurements to the current measurement page and move the
selected measurements up or down in the measurement page.
•
exclude unimportant measurement data objects from the measurement page.
•
export the selected measurements as a re-usable template.
•
select measurements according to a specified measurement template.
•
save the current measurement page configuration.
Table 3.7-1 Properties for measurement configuration
Property
Source
Show Description
Description
Show Unit
Decimals
Display Multiplier
Device Unit
Device Multiplier
Document Library
The Document Library allows you can maintain a library of documents associated with
the SCL elements.
To add files to the Document Library:
1. Launch the Document Library from the gateway object in the substation view. The
Document Library window opens showing the files available in the library.
Description
Item path from IED to data attribute.
Defines whether the description is shown.
If defined, overrides the description from the IED configuration.
Defines whether the unit is shown.
Defines the amount of decimals shown.
Defines the multiplier for the measurement.
Overrides the unit which the IED is sending.
Overrides the multiplier which the IED is sending.
39