Haier HTD1268 Service Manual page 15

Control Panel
F drying button
Press this button and the drying icon of the display screen brightens.When the
program finally comes to the drying process,the drying icon twinkles,indicating the
start of the drying program.If you want to cancel the program,press the start/pause
button before the program comes to the end of the drying process.Press the drying
button again and the drying function is canceled while the drying icon extinguishes.
G super-clean rinse button
Press this button and the super-clean rinse icon of the display screen brightens.Before
the program comes to the softening process,the machine will automatically add one
more rinse program.At the same time the super-clean rinse icon twinkles until the
super-clean rinse program comes to an end.The program continues until the end.
H pre-washing button
In room dirty clothes are to be washed,press down this button before the start of the program and
the pre-washing icon of the display screenbrightens.After starting the washing machine,the pre-
washing program is the first to be operated.At this time the pre-washing icon twinkles and there is
water inflow in room1of detergent-dispersing package.At the end of the pre-washing program,the
pre-washing icon extinguishes and other programs begin to operate.
I Reservation button
Press down the reservation button when needed before the program starts.The default time is 9
hours.Each time the button is pressed the default time increases by30minutes.If the button is
pressed continuously,the default time can be accumulated.It cycles from 0 hour to 24 hours until
you stop pressing the button.After setting the reservation time,the reservation icon brightens and it
won't extinguish until the end of the reservation program.The reservation time includes the period
from the operation of the program till it send.Therefore,the preset reservation time should be at
least longer than the time span of the operation of the program,orelse the program won't perform
the reservation function and goes directly to the washing process.
J Display screen
The remaining time of the washing process,the set temperature and speed,the additional functions
as well as the warning message are to be shown on the display screen.For details please refer to
the introduction of the display screen.
K Detergent-dispersing package
Open the detergent-dispersing package and you will see 3 little rooms fordetergent:
Room1:If pre-washing function is needed,put detergent in this room.Otherwise,
no detergent should be put in here.
Room2:When washing in the first 6 programs,put detergent in this room whether
a pre-washing program is needed or not.
Room3:Put some softener,conditioner or spice in this room to soften or do other treatment to ward
the clothes.
D+I Keyboard lock button
After starting the program,press down the reservation button and the start/pause button
simultaneously for 3 seconds and the keyboard lock function will be started.At this time the digital
area shows "SAFEON".Press the buttons again for 3 seconds and the function is canceled.And the
digital area shows "SAFEOFF".This function is set for fear of outside intrusion in the operation of
the program.For example,if children press the functional or program buttons out of curiosity,it will
do affect the washing program or even interrupt the program.
Note:if the keyboard lock is started when the program is in operation,the keyboard lock function
will be canceled automatically at the end of the program when it shows "End".
Note:In the washing process,if the keyboard lock is not started,turn the program button to the off
position of the machine and the current program will be canceled.Turn the program button again to
choose a new program.
Washer And Dryer
14
Model:HTD1268 SERIES