To Set Or Change An Sos Number; To Register A Handset - Philips VOX300 User Manual

To set or change an SOS number

The SOS number feature allows you to enter 3 SOS phone numbers, which can be dialed
out although the call barring is activated. The maximum length of an SOS number is 4
digits. The PIN code is required when modify the SOS number.
1. Press and press Down
2. Press and press Down
3. Press and enter the PIN code
4. Press , scroll
.
5. Enter the SOS number

To register a handset

Up to 5 handsets can be registered to the base station.
If you have inadvertently unregistered your handset, you can register it again. Additional
handsets must be registered to the base before use.
Warning : If you wish to register non Philips handsets to the CD 135 base station,
make sure that this handset is GAP compliant otherwise it will not operate properly
(see page 11).
To register a handset, first press the paging key
when the base is in idle mode. Then carry out the following steps on the handset within
one minute :
1. Press and press Down
2. Press and press Down
3. Press , enter the PIN code
to confirm.
If the registration was successfull, a long confirmation tone is heard and the handset
number (1 to 5) will be assigned by the base automatically.
Advanced settings
to reach ADVANCE SET.
to reach SOS NUMBER.
to select the SOS number location 1, 2 or 3 and press
(max. 4 digits) and press
to reach ADVANCE SET.
to reach REGISTRATION.
(by default the PIN code is 0000) and press
(by default the PIN code is 0000).
to confirm.
on the base for approx. 5 seconds
EN
31