Philips VOX300 User Manual page 37

Note: When ANSWER ONLY / ACTIVATED is selected, then the
associated outgoing message is automatically set, i.e. „This is an answering
machine, please call back later".
When ANSWER ONLY / DEACTIVATED is selected, then the associated
outgoing message is automatically set, i.e. „This is an answering machine, please
leave your message after the tone".
The voice language for the default outgoing messages depends on the country
selected in Welcome mode, see page 2.
To set the number of rings before answering
You can set the answer machine to start playing the outgoing message after a given number
of rings (3, 5 (default setting) or 7).
1. Press and press Down
2. Press , ANSWER ONLY is shown, press Down
3. Press , scroll
4. Press to confirm.
To activate / deactivate the remote control
By default the remote control of the answer machine is deactivated. You can activate this
function, this allows you to remotely access your answer machine via any telephone and
check your messages.
1. Press and press Down
2. Press , ANSWER ONLY is shown, press Down
3. Press , scroll
or ACTIVATED).
4. Press to confirm.
Note: To remotely control your answer machine, see page 40.
Answer machine
to reach ANS MACHINE.
to select one of the available settings (3, 5, or 7).
to reach ANS MACHINE.
to select one of the available settings (DEACTIVATED
to reach NB RINGS.
to reach REMOTE.
37
EN