Philips VOX300 User Manual page 38

EN
To activate / deactivate call screening
You can activate (default setting) or deactivate the call screening on the handset
loudspeaker so that you can choose whether to hear or not the callers leaving a message
and to decide whether or not to take the call.
1. Press
2. Press
3. Press
4. Press
Personal outgoing messages
You can record one personal outgoing message. This personal outgoing message will
replace the default ones. Only if you delete your personalized welcome message the
default welcome messages will automatically be restored. You do not need to delete your
previously recorded welcome message to record a new one. Once you record a new
welcome message, the old one will be overwritten.
To record your personal outgoing message
1. Press
2. Long press
Speak into the microphone of the handset after the beep.
3. Press
Note: If you want to have the default outgoing message back, repeat steps 1 and
2 and press
restore the default outgoing message.
To playback personal or default outgoing message
Depending on the answer mode setting „Answer & record" or „Answer only" (see
page 37) the appropriate default outgoing message will be played. If you have recorded a
personal outgoing message only this welcome message will be played.
1. Press
2. Press
38
Answer machine
and press Down
, ANSWER ONLY is shown, press Down
, scroll to select one of the available settings (ON or OFF).
to confirm.
on the handset to enter answer machine mode.
until you hear a beep.
or or
within 1 second to stop recording. The answer machine will
on the handset to enter answer machine mode.
until outgoing message playback starts.
to reach ANS MACHINE.
to stop recording.
to reach SCREENING.