Replacing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
CAUTION: To avoid damage to the wireless card, do not place any cables
under it.
1
Align the notch on the wireless card with the tab on the wireless-card slot.
2
Align the screw hole on the wireless card with the screw hole on the system
board.
3
Slide the wireless card into the wireless-card slot.
4
Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless
card supported by your computer.
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
5
Place the wireless-card bracket on the wireless card and align the screw hole on
the wireless-card bracket with the screw hole on the system board.
6
Replace the screw that secures the wireless card to the system board.
Post-requisites
1
Replace the
base
2
Replace the battery.
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
Antenna-cable color
white
black
Before
www.dell.com/
35