Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Slide the I/O-board cable into the I/O-board cable connector and press down on
the latch to secure the cable.
2
Turn over the I/O board and align the screw hole on the I/O board with the
screw hole on the palm-rest assembly.
3
Replace the screw that secures the I/O board to the palm-rest assembly.
Post-requisites
1
Follow the procedure from step 3 to step 8 in
2
Replace the keyboard.
3
Replace the
wireless
4
Replace the
hard
5
Replace the
base
6
Replace the
optical
7
Replace the battery.
computer. After working inside your computer, follow
After working inside your
card.
drive.
cover.
drive.
computer. For more safety best
www.dell.com/
"Replacing the computer
Before
base".
57