Table of Contents
Advertisement
TROUBLESHOOTING
Symptom
Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
The unit does not work at all.
• Radio reception is poor.
• Static noise while listening
to the radio.
Disc cannot be ejected.
Noise is generated.
Tracks do not play back as you
intended them to play.
"READING" keeps flashing.
Elapsed playing time is not
correct.
"LOADING" appears when you
enter search mode by pressing
.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the
terminals of the speaker wires are insulated
properly. Turn the power on again.
Send the unit to the nearest service center.
Clean the connectors. ( 25)
Reset the unit. ( 3)
Connect the antenna firmly.
Press and hold M to forcibly eject the disc. Be
careful not to drop the disc when it is ejected. If this
does not solve the problem, reset the unit. ( 3)
Skip to another track or change the disc.
Playback order is determined when files are
recorded.
Do not use too many hierarchical levels or folders.
This is caused by how the tracks are recorded.
This unit is still preparing the iPod/iPhone music
list. It may take some time to load, try again later.
Symptom
Remedy
Correct characters are not
• This unit can only display uppercase letters, numbers, and
displayed (e.g. album
a limited number of symbols.
name).
• Depending on the display language you have selected
( 5), some characters may not be displayed correctly.
"NA FILE"
Make sure the disc contains supported audio files. ( 26)
"NO DISC"
Insert a playable disc into the loading slot.
"TOC ERROR"
Make sure the disc is clean and inserted properly.
"PLEASE EJECT"
Reset the unit. If this does not solve the problem, consult
your nearest service center.
"READ ERROR"
Copy the files and folders onto the USB device again. If this
does not solve the problem, reset the USB device or use
another USB device.
"NO DEVICE"
Connect a USB device, and change the source to USB again.
"COPY PRO"
A copy-protected file is played.
• Check whether the connected device is compatible with
"UNSUPPORTED DEVICE"
appears.
this unit and ensure the file systems are in supported
formats. ( 26)
• Reattach the device.
"UNRESPONSIVE DEVICE"
Make sure the device is not malfunction and reattach the
appears.
device.
"USB HUB IS NOT
This unit cannot support a USB device connected via a USB
SUPPORTED" appears.
hub.
"NO MUSIC"
Connect a USB device that contains playable audio files.
"iPod ERROR"
• Reconnect the iPod.
• Reset the iPod.
23
ENGLISH
Hide quick links:
Advertisement
Table of Contents
