Sony DVS-9000 System User Manual page 1060

Icon Title
Password
Record
Rename
Set Time/
Date
Warning
Warning
Warning
(System
Config)
1060
Error Messages
Message
Password Incorrect
Cannot be executed.Maximum
number of clips are created.
Files currently used for
playback cannot be renamed.
Error: Wrong Format.
No Switcher information
available.
Please confirm "Network
Configuration" on Page 7311.
This operation will be
cancelled, because the register
is locked.
Please change the register
status to be unlocked first.
Illegal Network Config
Information (Page 7311)
Illegal Panel Assign
Information for Dual Simul
Operation (Page 7312)
No Panel Assign Information
(Page 7312)
No Switcher Assign
Information (Page 7312)
No System Operation Mode
Information (Page 7312)
No DME Channel Information
Description
7317.1: Engineering Setup >System
>Maintenance >Setup Operation Lock
In the above menu, the wrong password was
entered.
Enter the correct password.
2523: Frame Memory >Clip >Record
In the above menu, an attempt was made to
execute [Rec Start] but the number of recorded
clips had already reached its upper limit.
2546: Frame Memory >File >Rename
In the above menu, an attempt was made to
execute [Rename], but a movie (clip) currently
being played back is included in the selected
files.
7317: Engineering
Setup >System >Maintenance
In the above menu, an incorrect date and time
was specified. Specify the date and time
correctly.
When starting up the menu system, the
switcher is not present in the system
information. Check the Data LAN connections,
and in the 7311: Engineering Setup >System
>Network Config menu, retry [Auto Config].
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store
>Edit
6411.1: Shotbox >Register >Store >Edit
In the above menus, an attempt was made to
store in a locked register. Unlock the register
before carrying out the store.
When starting up the menu system, if the
system information read from the control panel
is not correct, one of these messages, that
corresponds to the situation appears.
Following the message, use 7311: Engineering
Setup >System >Network Config or
7312: Engineering Setup >System >System
Config to retry the operation.