Settings Relating To Video Switching (Transition Menu); Selecting The Bank To Make The Settings - Sony DVS-9000 System User Manual

Settings Relating to Video Switching
(Transition Menu)
For settings relating to video switching, use the Switcher >Transition menu.
To display the Transition menu
In the Engineering Setup menu, select VF3 'Switcher' and HF4 'Transition.'
The status area shows the transition preview, key transition, bus toggle, and
split fader settings for each M/E and PGM/PST bank.
The following functions are available here.
• Transition Preview: Specify the operation mode for transition preview for
• Key Transition: Specify the operation mode for independent key
• Bus Toggle: Switch the bus toggle for each of the M/E and PGM/PST banks
• Preset Color Mix: Set the stroke mode for a preset color mix, the key status
• Transition Curve: Set the relationship when carrying out a transition,

Selecting the Bank to Make the Settings

In the Transition menu, using any of the following methods, select the bank to
which the settings apply, then make the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob
1
The selected bank appears in reverse video.
Setting the transition preview mode
To select the transition preview mode, in the <Transition Preview> group of
the Transition menu, select either of the following.
One Time: The transition preview ends after a single transition.
954

Settings Relating to Video Switching (Transition Menu)

each of the M/E and PGM/PST banks.
transitions.
on or off.
for a transition including a key, and the mode in which the transition type
after a transition ends returns to the previous setting.
between the fader lever position and the advancement state of the transition.
Parameter Adjustment
Bank M/E or P/P selection to which settings apply
Setting values
1 to 4