Settings Relating To Video Switching (Transition Menu) - Sony DVS-9000 User Manual

2
Press [4:3 Crop], turning it on.
This enables the crop setting, and this is reflected in the status area.
Note
When the screen aspect ratio of 16:9 is selected for all M/E banks in the System
>Format >Active Line/Aspect menu, the setting of 4:3 Crop is disabled.

Settings Relating to Video Switching (Transition Menu)

For settings relating to video switching, use the Switcher >Transition menu.
To display the Transition menu
In the Engineering Setup menu, select VF3 'Switcher' and HF4 'Transition.'
The status area shows the transition preview, key transition, bus toggle, and
split fader settings for each M/E and P/P bank.
Selecting the bank to which the settings apply
In the Transition menu, using any of the following methods, select the bank to
which the settings apply, then make the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Bank
The selected bank appears in reverse video.
Setting the transition preview mode
To select the transition preview mode, in the <Transition Preview> group of
the Transition menu, select either of the following.
One Time: The transition preview ends after a single transition.
Normal: Switching the [TRANS PVW] button on or off switches between the
transition preview mode and the normal mode.
Selecting the transition mode of the independent key transition
control block
To select the key transition mode, select either of the following in the <Key
Transition> group of the Transition menu.
Same: The transition settings for the On and Off directions are the same.
M/E or P/P selection to which settings apply
Setting values
1 to 4
Setup Relating to Switcher Processor
371