Sony DVS-9000 User Manual page 323

3
4
5
To disable a button
In the Panel >Xpt Assign >Main, V/K Pair Assign menu, select the button you
want to disable, and press [Inhibit].
To delecte any currently assigned signal
In the Panel >Xpt Assign >Main, V/K Pair Assign menu, select the button
corresponding to the signal you want to delete, and press [Delete] in the <Xpt
Assign> group.
Signal deletion is executed in accordance with the selection in the <Assign>
group, and the signal assigned to the button number next to the selected button
number and following signals move up one line.
322
Setup Relating to Operations From the Control Panel
When assigning a video signal, press [Video] in the <Assign> group.
When assigning a key signal, press [Key]. (You can select a video signal
and a key signal at the same time.)
Note
[Video] and [Key] in the <Assign> group cannot be turned off at the same
time. At least the one or the other is always on.
Use any of the following methods to select the signal to assign.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
3 Source No Selection of source to be assigned
Using the buttons in the <Xpt Assign> group, assign the selected signal to
the button number currently selected in the main table.
Set: Delete the signal currently assigned to the selected button number and
make a new assignment.
Insert: Move down one line the signal currently assigned to the selected
button number and following signals, and make a new assignment.
Note
When a button number in the range 121 to 128 is selected, execution of
"Insert" is impossible. The signal assignments to button numbers 121 to
128 cannot be changed. When "Insert" is executed for any other number,
moving down of signals ends at number 120, and the signals assigned to
numbers 121 to 128 are maintained in their original lines.
Setting values
1 to 128