Tally Copy Settings (Tally Copy Menu) - Sony DVS-9000 User Manual

This deletes the selected tally generation entry.

Tally Copy Settings (Tally Copy Menu)

For settings relating to the tally copy function, use the Router/Tally >Tally
Copy menu. The settings are common to the parallel and serial tallies.
To display the Tally Copy menu
In the Engineering Setup menu, select VF6 'Router/Tally' and HF5 'Tally
Copy.'
The status area shows the tally copy status.
Making new tally copy settings
1
In the Router/Tally >Tally Copy menu, select [New].
The New menu appears.
2
Turn the knob to select the copy-from source.
When setting more than one tally copy, you can specify the copy-from
source start and end addresses.
Knob
1
2
3
Specify the copy-to source address.
Knob
3
4
4
Press [Execute].
This makes the tally copy setting according to the specifications in steps 2
and 3.
Modifying tally copy settings
1
In the Router/Tally >Tally Copy menu, press [Modify].
The Modify menu appears.
Parameter Adjustment
Copy From (From) Copy-from source start address
Copy From (To) Copy-from source end address
Parameter Adjustment
Copy To (From) Copy-to source (start) address
Copy To (To) Copy-to source (end) address
Setting values
1 to 1024
1 to 1024
Setting values
1 to 1024
1 to 1024
Setup Relating to Router Interface and Tally
425