Sony DVS-9000 User Manual page 87

2
Blind settings
The Blind effect divides the image into bars or wedges, with blocks rotating
like the slats of venetian blinds.
To apply the Blind effect
With the Blind menu displayed, use the following procedure.
1
2
3
86
DME Special Effect Operations
Knob Parameter Adjustment
1 Transition Degree of transition
2 Random Degree of randomness in distance
moved by each block
3 Angle Direction of movement
To set the partition method, press [Partition] and set the following
parameters.
Knob Parameter Adjustment
1 Width Width of partition
2 Random Degree of randomness in partition
width
3 Angle Partition angle
In the <Mode> group, select [Bar] or [Wedge].
To make transition settings, press [Transition] and set the following
parameters.
Knob Parameter Adjustment
1 Rotation Number of rotations of the blocks
2 Perspective Degree of randomness in distance
moved by each block
To set the partition method, press [Partition] and set the following
parameters.
• When Bar was selected in step 1
Knob Parameter Adjustment
1 Width Width of partition
2 Offset Degree of randomness in partition
width
3 Angle Starting angle of effect
Setting values
0.000 to 100.000
–100.000 to
+100.000
–8.000 to +8.000
Setting values
0.000 to 100.000
0.000 to 100.000
–8.000 to +8.000
Setting values
–8.000 to +8.000
0.000 to 100.000
Setting values
0.000 to 100.000
–5.000 to +5.000
–8.000 to +8.000