Sony DVS-9000 User Manual page 135

Mixing pairwise the images of channels 1 and 2, and channels 3
and 4
1
2
3
4
Automatically setting the priority of overlapping images
To set the system so that the priority of overlapping images is automatically
determined by their position on the z-axis, in the Combiner Priority menu,
press [Auto], turning it on.
Note
It is not possible to cross images. If an image is rotated, the priority is
determined by the position on the z-axis of the center of the image.
134
Global Effect Operations
Knob Parameter
2 Mix2
a) See "Global Effects" in Chapter 1 (Volume 1).
For case "Ch1+Ch2+Ch3+Ch4"
Knobs 1 and 2 set the same parameters as "For case 'Ch1+Ch2+Ch3',"
respectively. Knob 3 is additionally effective, which sets the parameter
Mix3 (in the same setting value range as with knobs 1 and 2).
In the Combiner Priority menu, press [Combiner1 Mix], turning it on.
Adjust the following parameter.
Knob Parameter
1 Mix1
a) See "Global Effects" in Chapter 1 (Volume 1).
Press [Combiner2 Mix], turning it on.
Adjust the following parameter.
Knob Parameter
1 Mix2
a) See "Global Effects" in Chapter 1 (Volume 1).
Adjustment
Mix degree for channels
2 and 3
Adjustment
Mix degree for channels
1 and 2
Adjustment
Mix degree for channels
2 and 3
Setting values
a)
0.00 to 100.00
Setting values
a)
0.00 to 100.00
Setting values
a)
0.00 to 100.00