Sony DVS-9000 User Manual page 86

Knob
2
3
3
To set the ring center position, press [Position] and set the following
parameters.
Knob
1
2
4
To partition into pixels, press [Pixel], turning it on, and set the following
parameters.
Knob
1
2
Broken Glass settings
The Broken Glass effect partitions the image like broken glass, with shards
flying outward.
To apply the Broken Glass effect
Display the Broken Glass menu.
The functions of the knobs in the Broken Glass menu are the same as those of
the Rings menu, with the exception of [Direction].
For details about operation, see "Rings settings" (page 84).
To fix the direction in which shards scatter
Press [Direction], turning it on.
Flying Bar settings
The Flying Bar effect divides the image into bars which peel off in two blocks
as they move.
To apply the Flying Bar effect
With the Flying Bars menu displayed, use the following procedure.
1
To make transition settings, press [Transition] and set the following
parameters.
Parameter Adjustment
Random Degree of randomness in partition
width
Angle Starting angle of effect
Parameter Adjustment
H Horizontal center position
V Vertical center position
Parameter Adjustment
Density Degree to which image disappears
around periphery
Random Degree of jaggies at block edges
Setting values
0.000 to 100.000
–8.000 to +8.000
Setting values
–5.000 to +5.000
–4.000 to +4.000
Setting values
0.00 to 100.00
0.00 to 100.00
DME Special Effect Operations
85