Sony DVS-9000 User Manual page 121

To select the lighted area
In the <Area Select> group, select one of the following.
FRGD: The light strikes the image foreground.
BKGD: The light strikes the image background.
Both: The light strikes both foreground and background.
For more information about the lighted area, see "Digital Multi Effects
(DME)" in Chapter 1 (Volume 1).
Notes
• If you select [Multiply] in the <Fill Blending Mode> group of the Light
• If the setting of [Brilliancy] in the <Fill Source> group of the Light Color
• When the global effect Combiner is set to Mix or Depth, the light effect is
To select Surface Flat
Press [Surface Flat], turning it on.
If you have selected anything other than Flat in the <Surface Select> group of
the Spot Lighting menu, the part corresponding only to the surface being struck
by the currently set light from the light source is shown in the same way as if
Flat had been selected.
To set the shape of the light
1
2
120
DME Special Effect Operations
Knob Parameter
5 Amp
a) Light appears from Z direction. At –100.00 the light goes deepest, at +100.00 the whole
image is lit like a flat effect.
Color Adjust menu (see page 122), the light effect is not applied to the
background, even if you select BKGD or Both.
Adjust menu (see page 122) is 100.00, the light effect is not applied to the
background, even if you select BKGD or Both.
not applied to the background, even if you select BKGD or Both.
Press [Shape], turning it on.
Set the following parameters.
Knob Parameter
1 Shape Ptn
2 Size
3 Deform
4 Soft
5 Angle
Adjustment
Distance of light
Adjustment
Shape pattern
Shape size
Amount of shape deformation
Softness of shape pattern
Angle of shape pattern rotation
Setting values
a)
–100.00 to +100.00
Setting values
a)
1 to 2
0.00 to 6.00
b)
0.00 to 100.00
0.00 to 100.00
c)
–8.00 to +8.00