Sony DVS-9000 User Manual page 150

Clearing output port settings
To clear the settings for each device (GPI output port)
1
In the list on the left of the status area, select the GPI output port whose
settings you want to clear.
2
In the list on the right, select "Off."
3
Press [Set].
To clear the settings for all devices (GPI output ports) in a single
operation
Press [All Off].
Setting the action for a rewind operation
On the GPI timeline, when the [REWIND] button in the keyframe control
block is pressed the action set for the first keyframe is not executed; when the
[RUN] button is pressed, then the first keyframe action is executed.
To execute an action when the [REWIND] button is pressed, it is necessary to
set this action (Rewind Action). To carry out this setting, in the Device >GPI
Timeline menu, press [Rewind Action] to recall the Rewind Action menu. In
this setting screen, use the same setting method as in the screen for setting an
action on the GPI timeline.
Alternatively, you can select the reverse arrangement, whereby when the
[REWIND] button is pressed, this executes the action set for the first keyframe,
and when the [RUN] button is pressed the first keyframe action is not executed.
In this case, the Rewind Action setting is still valid.
For details of the setting, see "Setting the first keyframe when a rewind is
executed" (page 353).
149
Control of GPI Devices