Sony DVS-9000 User Manual page 174

3
Enter a file name and press [Enter].
When using the Sony disk recorder 9-pin protocol: Up to 23 characters.
When using the video disk communications protocol: Up to 8
characters (in Fixed 8 Character mode) or 23 characters (in Variable
Length mode)
For details of how to select the file name character count mode in the video
disk communications protocol, see "To make detailed settings for a disk
recorder (Sony disk 9-pin protocol)" (page 413).
The name appears as the current file name at the top of the status area.
When the loaded file is not a target for recording
When a file that is not a target for recording is loaded in the disk recorder,
proceed as follows.
1
In the Device menu, press VF3 'DDR/VTR' and HF3 'File List.'
The Device >DDR/VTR >File List menu appears.
2
Press [Unload].
The current file name at the top of the status area is cleared.
Control of VTRs, Extended VTRs, and Disk Recorders
173