Sony DVS-9000 User Manual page 590

Icon Title Message
Create [Create Key Frame] cannot be
Key Frame executed.
FMx is not assigned to a user
region.
[Create Key Frame] cannot be
executed.
Key Frame Register is locked.
(UserX)
[Create Key Frame] cannot be
executed.
Key Frame Register is busy.
(UserX)
[Create Key Frame] cannot be
executed.
Key Frame Register is being
edited. (UserX)
[Create Key Frame] cannot be
executed.
There is no free Key Frame.
(UserX)
[Create Key Frame] cannot be
executed.
Key Frame Register is not
active. (UserX)
Deactivate The license will be deactivated
License after rebooting your system.
Disk Success!!
Format
Failure.
Make sure of the memory card.
Description
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame], but it failed
because the frame memory output (FMx) is not
assigned to a user region.
7331.4: Make the assignment in the
Engineering Setup >Switcher >Config >User1-8
Config menu, and try again.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame] using a locked
register (UserX region). Unlock the register.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
[Create Key Frame] using a register (UserX
region) into which files are being loaded. Try
again after file loading has finished.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame] using a register
(UserX region) with which a keyframe creating
or editing operation is proceeding. Try again
after the keyframe operation has finished.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame] for a UserX region
with insufficient usable keyframes.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame] using a register for
which the appropriate region selection button in
the numeric keypad control block is not
selected. Try again after you select the region
selection button [UserX] in the numeric keypad
control block.
7316.7: Engineering Setup >System >Install/
Unit Config >License >License Management
In the above menu, the Deactivate License
procedure completed successfully.
7317: Engineering Setup >System
>Maintenance
In the above menu, removable disk formatting
procedure completed successfully.
7317: Engineering Setup >System
>Maintenance
In the above menu, removable disk formatting
procedure failed. Check that the memory card
is correctly inserted.
589
Error Messages